The structure of the Pe pipe production line: Pe pipe production line by mold molding, sizing casing and cooling device. Used in the production of plastic pipe mold by shunt bracket, die bodies and spindle, forming mould, etc.
PE pipe production line features:
High degree of automation, easy operation, continuous production, stable and reliable.
Production of PE pipe has a non-toxic, tasteless, non-corrosive, anti-aging, good weather resistance. It is the first selection of inter-city gas pipeline and water supply pipe;
If you are using a type of polyolefin large diameter tube mould as stents, due to the bracket, it would be a tube wall of the longitudinal ribs. Therefore, it is commonly used in the production of large diameter hdpe pipe, gas pipe and some important new material. The nose.
Because when the material through the supporting shear force is different, so the support near the shear force is greater than the center. In the support area, the flow of the material difference exists a certain speed. If the compression ratio is too small or straight line part of the mould is too short, the lining of the tube with a trace of the stent, and in severe cases, there will be longitudinal cracks.
Online 1